FreeTextSearch
 
search View English language version of this page
 
 
 

Particle release and control of worker exposure during laboratory-scale synthesis, handling and simulated spills of manufactured nanomaterials in fume hoods

Reference Fonseca AS, Kuijpers E, Kling KI, et al. Particle release and control of worker exposure during laboratory-scale synthesis, handling and simulated spills of manufactured nanomaterials in fume hoods. Journal of Nanoparticle Research 2018;20(2):48
Udgivet: 2018
[Type] Videnskabelig artikel
[Resumé] [Open access]Fume hoods are one of the most common types of equipment applied to reduce the potential of particle exposure in laboratory environments. A number of previous studies have shown particle release during work with nanomaterials under fume hoods. Here, we assessed laboratory workers' inhalation exposure during synthesis and handling of CuO, TiO2 and ZnO in a fume hood. In addition, we tested the capacity of a fume hood to prevent particle release to laboratory air during simulated spillage of different powders (silica fume, zirconia TZ-3Y and TiO2). Airborne particle concentrations were measured in near field, far field, and in the breathing zone of the worker. Handling CuO nanoparticles increased the concentration of small particles (< 58 nm) inside the fume hood (up to 1 x 10(5) cm(-3)). Synthesis, handling and packaging of ZnO and TiO2 nanoparticles did not result in detectable particle release to the laboratory air. Simulated powder spills showed a systematic increase in the particle concentrations inside the fume hood with increasing amount of material and drop height. Despite powder spills were sometimes observed to eject into the laboratory room, the spill events were rarely associated with notable release of particles from the fume hood. Overall, this study shows that a fume hood generally offers sufficient exposure control during synthesis and handling of nanomaterials. An appropriate fume hood with adequate sash height and face velocity prevents 98.3% of particles release into the surrounding environment. Care should still be made to consider spills and high cleanliness to prevent exposure via resuspension and inadvertent exposure by secondary routes
Link: http://dx.doi.org/10.1007/s11051-018-4136-3
Bestilling: Denne udgivelse kan ikke bestilles fra NFA's Forlag
[Oprettet] 19.03.2018
 
Opdateret  19.03.2018
Kontakt: NFA's webredaktion
 
Sociale medieomtaler af denne artikel

Klik på cirklen for mere information om omtaler og deling af denne artikel.

Altmetric er en tjeneste, der registrerer sociale medieomtaler og delinger af referencer forskningsartikler, hvis læsere har linket unikt til artiklen (tidskriftets abstractside, DOI-link etc.). Tjenesten overvåger p.t. omtaler på udvalgte sociale medieplatforme.

Hvis cirklen viser "?", er der endnu ikke registreret omtaler på de overvågede medier.

Om betalingstidsskrifter
Mange videnskabelige tidsskrifter tager betaling for adgang til hele artiklen. Hvis du ikke har adgang til et bestemt tidsskrift, kan du benytte Bibliotek.dk. Her kan du søge efter artikler, bogtitler og tidsskrifter på tværs af de danske bibliotekssystemer.

Det letteste er at gå ind under "Flere søgemuligheder" på siden og så indtaste tidsskriftets navn i Feltet "Titel". Derved får du en oversigt over folke- eller forskningsbiblioteker, som abonnerer på det pågældende tidsskrift.

 
 
 

Det Nationale Forskningscenter for Arbejdsmiljø | Lersø Parkallé 105 | DK-2100 København Ø |

Tlf 39 16 52 00 | fax 39 16 52 01 | e-mail: nfa@arbejdsmiljoforskning.dk | CVR: 15413700 | EAN: 5798000399518

Vis desktop version
|WEBSITET ANVENDER COOKIES TIL AT HUSKE DIG OG DINE INDSTILLINGER.| Læs mere her